Leveling the Machine and Finishing Up
The QuietLine washer/dryer should
be installed on a level surface that is
well supported to prevent vibration.
Preferably the machine should be
installed on a solid and level floor
surface.
The machine must be leveled
properly before operation. This will
prevent excessive noise, vibration,
and possible damage to machine.
The QuietLine has four leveling legs
which can be adjusted and locked
for proper leveling.
Put the machine into its final
operating location.
1.
Using a level, check both front
to back and side to side on the
machine. If it is not level, make
appropriate adjustments to the
feet until it is.
2.
Summary:
To adjust feet, loosen locknuts
using the leveling leg wrench,
and screw the foot up or down
until the machine does not rock
and is level.
2.
REFER TO MACHINE’S MANUAL AND EZ WASH GUIDE FOR
OPERATING INSTRUCTIONS.
