21
TROUBLESHOOTING GUIDE
Soluti on
IPod
,
iPhone
,
iPad Player(Example “iPod”)
Plug the AC adaptor into a wall
outlet and plug the connector
into the DC IN jack on the unit.
AC adaptor is not plugged into a
wall outlet or the connector is
not plugged into the DC IN jack
on the back of the unit.
Using no or wrong iPod insert
iPod did not install properly
iPod is not installed properly
iPod is locked up
Using first or second generation
iPod, iPod shuffle or other
devices.
iPod is not installed properly
iPod is locked up/frozen
iPod battery has problem
Unit does not respond
(no power)
iPod does not dock
properly
iPod does not
respond to the unit
iPod did not
charge up
Make
sure
the
dock
insert
is
the
proper
fit for the iPod.
Remove
the
iPod
from
the
dock
and
check
for
obstruction
on
the connections
in
the
dock
and
on
the
iPod. Then reseat it in
the dock.
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.
This unit cannot control those
iPod or other devices.
Please make sure your iPod is
working properly before docking
into the unit. Please refer to the
iPod manual for details.
Remarks:
If trouble shooting does not eliminate the problem, disconnect the DC IN plug from the back of
unit and reconnect after a few seconds. This resets the unit to it’s factory default settings and
results in the deletion of all previous settings.
Symptom
Possible
Cause
Remove
the
iPod
from
the
dock
and
check
for
obstruction
on
the connections
in
the
dock
and
on
the
iPod. Then reseat it in
the dock.
Remove
the
iPod
from
the
dock
and
check
for
obstruction
on
the connections
in
the
dock
and
on
the
iPod. Then reseat it in
the dock.
ENGLISH
