10
Instructions before Use
2.1 Installing the SIM card and the battery
You need to insert the SIM card and charge the battery before using the phone.
Keep all miniature SIM cards out of the reach of little children.
Be careful to handle, insert or remove the SIM card since the SIM card and the
contacts inside can easily be damaged by scratching or bending.
Before installing/removing the SIM card, always make sure that the phone is
switched off.
1. Remove the back cover and lift the battery away.
2. Insert the SIM card, install the battery and attach the battery cover.
Note: make sure that the metallic contacts of the battery are facing the metallic
contacts in the battery slot.
2.2 Charge battery
Hold buttons at the two sides of the battery charger and then plug the charger to
the charging socket at the bottom of cell phone
。
Note: Please handle carefully. Do not pull out charging plug by force. This
may damage your cell phone or charger.
• Before use, battery supplied with your cell phone should be completely
charged.
• While charging, do not remove the battery or SIM card.
• Once battery is used up, the cell phone will shutdown automatically.
2.3 Power on/off
Ensure battery is properly installed.
Power on and hold [End key] button until boot screen appears.
Some SIM cards have PIN code protection. If there is prompt for input your PIN
code, input your PIN code and then press [OK].
Default PIN code is 1234.
After power on, if SIM card inserted is valid, your cell phone will automatically
search available network; If not, it will prompt: No SIM card is available.