background image

 

18

13. Net dimensions:                    22.8 X 21.2 X 20.8 inch 
14. Net weight:                           48.5 lbs 

• 

User’s instructions 

 

Note:

 This TV set has been installed together with a caption decoder and control to 

US Federal Communications Commission. 

 

Customized Power On setup 

 
This TV set is designed for customized initiation. (For detailed information, see the 
User’s Manual.) The TV set has been preset before delivery and can be reset by the 

user. 
   

Power on 

 

1.  When the TV set is connected with the power supply, the power indicator 

illuminates. When the Power On/Off button on the TV set or the remote controller 

is pressed, the TV set is started. 
 

2.  When the MENU button on the remote controller is pressed, the menu will appear 

on the screen. The CH and VOL buttons are used for setup. 

 

3.  Press of CH+ or CH- button will result in moving the icon up or down for function 

options. The designated item will turn green.   

 

4.  Pressing the VOL+ or VOL- button can change the designated item. 

 
 

VIDEO setup 

 

1.  Press MENU button for VIDEO option. 
2.  Press CH+ or CH- button to designate desired item. (Move the icon to designated 

item and the submenu will appear.) 

3.  The menu item under the icon will turn bright green. Press VOL+ or VOL- button 

for options. 

 

Options VOL+  VOL- 

CONTRAST 

Contrast increase 

Contrast decrease 

BRIGHT Brightness 

increase 

Brightness 

decrease 

COLOR 

Color increase 

Color decrease 

SHARP Sharpness 

increase 

Sharpness 

decrease 

TINT Tint 

increase 

Tint decrease  

 

4.  Press MENU button again to quit the main MENU. 

 

Summary of Contents for TV-8888-42














































Reviews: