Information to user: This television receiver
is equipped with close caption decoder and
parental blocking technology as required by
the FCC.
Getting Started With
Personalized Setup
Setting up this TV can be personalized, please refer to
this manual. It contains instructions to help you. The TV
is preset with default setting preset by manufacturer. To
get personalized settings, please read on.
1. Page 5 a brief introduction to the key functions.
2. Page 5 VIDEO.
3. Page 5 SETUP
4. Page 5 TIME
5. Page 6 SPECIAL
6. Page 6 V-CHIP
Turning The TV On
1. When the television is connected to power outlet, the
power indicator displays red. To turn on the set press
the ON/OFF button or press the on/off key on the
remote controller.
2. Press the M (MENU) key on the remote controller,
you will see a menu on the screen. Use key CH and
key VOL to set the TV to your preference
3. Pressing CH- or CH+ to the selected item will
highlight to green.
4. When a desired item is selected press VOL- and
VOL+ to change its parameter.
Defining VIDEO
VIDEO parameters:
* Press M (MENU) key and select VIDEO.
• Press CH- and CH+ to select an item (menu will roll
and show those hidden items with the action of the
CH+ and CH-)
• When a certain item is selected, it will be highlighted
green, use VOL+ and VOL- to change the parameter
to your preference.
Item
VOL+
VOL-
CONTRAST
C
CONTRAST-
BRIGHT
BRI
BRIGHTNESS-
COLOR
COLOR+
COLOR-
SHARP
SH
SHARPNESS-
TINT
TINT+
TINT-
Defining Setup
1. Press M (MENU), the main menu displays on the
screen:
2. Select item with CH+ and CH-, the selected item e.g.
language will highlight green;
3. Select the language you would like to see on your
screen (ENGLISH, ESPANOL, FRANCAIS) with VOL+
and VOL-;
4. RECEPTION: the default parameter is AIR, which
indicates the signal receiving method is through the
antenna of the TV. Use VOL+ to change it to CABLE if
you are using cable service.
5. AUTO PROGRAM, Pressing the VOL+ and VOL-, will
automatically search for TV channels. (When
available signal is detected, the channel will locked
in to release the lock, press VOL+, and the search
resumes)
6. ADD/DELETE use CH+ and CH-, press VOL- and
VOL+ to add or delete TV channels to/from the
program.
7. INPUT, you can alter the input method between AV
and TV. This could also be done by pressing the
AV/TV key on the remote controller.
8. Press M (MENU) to exit the menu.
5
English
