Channel set up:
By pressing MENU button ,and then pressing VOL-/+ button it will bring you to
Channel Set Up. You will see the following display on TV screen.
Follow the procedure below to select above options:
1.Press CH (+) button to go up and pressCH (-) button to go down the menu.
2.Press VOL (+) button or VOL (-) button to select your preference.
Channel system: Press the V-/+ buttons to select the correct channel system.
In general, you can set it as "AUTO" AUTO,NTSC and NTSC443 will
display in turn .
Current Ch. : Press VOL(+) button to go up and VOL (-) button to go down to set the
channel position. The display will show the current playing channel.
Skip :Press VOL(+) button or VOL(-) button to add or delete the channel from the
stored memory.
Antenna: Press VOL (+) button or VOL(-) button to select Air or Cable.
Channel Coverage by Antenna:
Antenna Type Channel Range
VHF 2-13
UHF 14-69
CATV 1-125
Fine tune:
Press VOL (+) button or VOL (-)
button to do Fine tune.
Auto program: Press VOL (+) button or VOL (-) button to do auto program. In this
process, the search automatically adds only the active channels in your area to the
TV's memory. It deletes any channels on which there is no broadcast
Note: After auto-search finished, the Air mode is preset. If you use cable, you must
change to cable mode in the set up menu.
If the picture and/or sound are poor, try using the FINE TUNE feature.
Do not use this feature unless reception is poor.
Channel
Antenna TV
Skip off
Current Ch. 0
Fine
Auto Program
Channel system Auto
Summary of Contents for TDC1314S
Page 33: ...WARRANTY 90 DAYS PARTS AND 1 YEAR LABOR ...
Page 34: ...TDC1314S ...