19
Unpacking Your W asher
Note:
English
High
Low
Warning: Leveling of washer is very important to prevent vibration
during spin.
Remove all packing materials. This includes the foam base and all
adhesive tape holding the washer accessories inside and outside.
Open the top lid to remove the styrofoam drum brace. Pull to remove.
Save drum brace. Reinstall when moving the washer.
Inspect and remove any remains of packing, tape or printed
materials before using the washer.
Your washer has 4 leveling legs; which are located on the four bottom
corners. After properly placing your washer in its final position, you can
level your washer.
Leveling Your Washer
Leveling legs can be adjusted by turning them counterclockwise to raise
your washer or turning them clockwise to lower your washer.
