Haier PRCS25TDAS - Appliances - Refrigerators, User Manual

Page: 10 / 36

Preparation Before Use
Remove all packing materials, including
foam base pad and tape used to attach
accessories.
Check accessory and documents:
Check materials against packing list. If any are
different or missing, inquire with the retailer.
Put the fridge in a proper place.
(Refer to the Location section.) “ ”
Installation of the lower decoration strip:
Open the refrigerator door. Take out the
decoration strip and install it in place as is
shown. Fasten with screws.
Copy the fridge model number and manufacturer's warranty number for all service calls or
inquiries you may have in the future.
It is recommended to clean the fridge
before use.
Mix 4L water with 1 tsp baking soda. Wipe
the interior and exterior with a soft cloth
moistened with this mixture.
On standby:
After the fridge is put into place, adjusted,
and cleaned, connect the power to begin
normal operation.
Connecting the Power:
The default temperature range of the fresh
food, freezer, and convertible compartment
is at a middle setting when the refrigerator
is first connected to the power supply.
The convertible compartment will be set
as a refrigerator.
Fridge work mode:
Manual adjustment: Set the temperature by pushing
the temperature-adjusting button. (Refer to Function
section.) Convertible compartment will be set in the
refrigerator mode by the factory.
“ ”
Put food inside the fridge:
After the fridge has been plugged in and
is fully cooled, it is safe to put in food
and begin use.
Every time the temperature settings are
changed, it takes some time for the
temperature to adjust. The length of time
depends on the amount of change, the
ambient temperature, frequent door
openings, quantity of stored food, etc.