manualshive.com logo in svg

Haier PBFS21EDAB, Service Manual

Share
Download
Haier PBFS21EDAB Service Manual Download Page 2

CONTENTS                               

                    PAGE 

1.PARTS IDENTIFICATIONS-------------------------------------------------------------1 

2.DISASSEMBLY of door----------------------------------------------------------------- 2 

3.CONTROL AND DISPLAY SYSTEM----------------------------------------------3~8

Control and display panel

----------------------------------------------------------------3~8 

4.REFRIGERATION PRINCIPLE---------------------------------------------------------9

System flow chart

-----------------------------------------------------------------------------9 

4.CIRCUIT DIAGRAM-----------------------------------------------------------------10~11 

4.1 Schematic

---------------------------------------------------------------------------------10 

4.2 Connect diagram

------------------------------------------------------------------------11 

5.Sensor and Error code-----------------------------------------------------------------12 

6.TROUBLESHOOTING--------------------------------------------------------------13~30

6.1 Common Troubles in Refrigerators and Remedies

------------------------13~24 

6.2 Instruction of replacing mullion,heater and sensor

-------------------------25~30

7.Other(Icemaker and defrost details)------------------------------------------------31

CONTENTS  

Summary of Contents for PBFS21EDAB





































Reviews:

No comments

Brands by name

Popular brands

Load more brands