Haier NS-F20C, Service Manual

Page: 6 / 15

6
Adjustable Items
Direct access key Items Description Preset Remark
“0” VG2 Adjust VG2 voltage
“1” 5/6HSH Horizontal shift ON A
“2” 5/6VSL Vertical slop 21 A
5/6VAM Vertical amplitude 45 A
5/6SCL S-correction 20 A
5/6VSH Vertical shift 38 A
5/6VOF OSD Vertical offset 38 A
HOF* OSD Horizontal offset 20 A
“3” RED Black level offset R 32 A
GRN Black level offset G 32 A
WPR White point R 31 A
WPG White point G 31 A
WPB White point B 31 A
YDFP Y-Delay for PAL
YDFN Y-Delay for NTSC
YDAV Y-Delay for AV
“4” TOP AGC Take-over point 27 A
VOL Volume 36
9860 Gain control for TDA9860 59
HDOL Cathode drive level 31
AGC IF AGC speed
VG2B VG2 Brightness
IFO Off-set IF demodulator
“5” Picture preset 1
0CON Listen: Contrast 0 A
0BRI Listen: Brightness 0 A
0COL Listen: Colour 50 A
0SHP Listen: Sharpness 50 A
1CON Soft: Contrast 45 A
1BRI Soft: Brightness 45 A
1COL Soft: Colour 50 A
1SHP Soft: Sharpness 50 A
“6” Picture preset 2
2CON Standard: Contrast 70 A
2BRI Standard: Brightness 50 A
2COL Standard: Colour 50 A
2SHP Standard: Sharpness 60 A
3CON Dynamic: Contrast 85 A
3BRI Dynamic: Brightness 60 A
3COL Dynamic: Colour 60 A
3SHP Dynamic: Sharpness 80 A
“7” OP1-OP9
“8” INIT Initialize EEPROM
“9” XMIN “no signal”osd the horizon
leftmost position
XMAX “no signal”osd the horizon
rightmost position
YMIN “no signal”osd the vertical
leftmost position
YMAX “no signal”osd the vertical
rightmost position