Haier MWM10100GCSS - SMALL Appliances - 1000 W..., Owner'S Manual

Page: 12 / 17

11
English
Menu Weight(g) Display
5.30 Oz 5.30 Oz
8.80Oz 8.80Oz
12.30Oz 12.30Oz
15.90Oz 15.90Oz
21.00Oz 21.00Oz
8.80Oz 8.80Oz
12.30oz 12.30oz
15.90Oz 15.90Oz
1(About 8.50Oz) 1
2(About 17.00Oz) 2
3(About 25.50Oz) 3
1(About 2.50Oz) 1
2 (About 5.00Oz) 2
3(About 7.50 Oz) 3
7. REHEAT
1) Press ” Reheat ” pad , the ” h-1 ” will display in LED and flash. ” AUTO ” indicator will light. (Press the ” Reheat ” pad
several times to select the the cooking program you wanted. h-1, h-2, h-3, h-4 will be displayed).
2) Press “ Start/+30 Sec/Confirm ” key to confirm,the ” h-1 ” will display.
3) Press ” Reheat ” pad , the weight of the menu will be displayed. ” Micro. ” and ” AUTO ” indicators will light.(Press the
"Reheat" pad several times to select the the weight of cooking food.)
4) Press “ Start/+30 Sec/Confirm ” key to start cooking. ” Micr. ” and ” AUTO ” indicators will flash and " Oz " indicator will
go out.
Reheat Chart
h-1
(Auto Reheat)
h-1
(Auto Reheat)
h-1
(Auto Reheat)
h-1
(Auto Reheat)
8. DEFROST BY TIME
1) Press ” Defrost ” once, the LED will display ” d-1 ”.” Micr. ” , "
QQ
" indicators will light.
2) Input the figure of the time of cooking.The maximum cooking time is 99 minutes and 99 seconds.
3) Press ”
Start/+30 SEC./Confirm ” key to start defrosting. ” Micro. ” and "
QQ
" indicators will flash.
9. DEFROST BY WEIGHT
1) Press ” Defrost ” pad twice, the LED will display ” d-2 ”. Keep pressing the same key to choose ” d-2 ”,” d-3 ”,” d-4 ”.
2) Input the figure to adjust the weight of food. ” Micr. ”, "
QQ
" and " Oz " indicators will light. (The input figure of the weight
should be within 3.50 Oz--70 Oz)
3) Press ” Start/+30 SEC./Confirm ” key to start defrosting. ” Micr. ” and "
QQ
" indicators will flash and " Oz " indicator will
go out.
10. MEMORY FUNCTION
1) Press ” Memory ” to choose memory 1-3 procedure. The LED will display 1,2,3.
2) If the procedure has been set, press ” Start/+30 SEC./Confirm ” to use it. If not, continue to set the procedure. Only
one or two stages can be set.
3) After finishing the setting, press ” Memory ” to save the procedure and turn back to the waiting state. If press
” Start/+30 SEC./Confirm ”, it will save and operate the setting.