Haier MRV II AV08NMVERA, Startup Manual

Page: 33 / 40

GRUPAd.o.o.
33
1.Unit start
After unit starts,select your desired operation mode(Operation mode
will be displayed on LCD)
2.TIMER mode selection
Press TIMER button on the remote controller to changeTIMER mode.
Every time the button is pressed,display of TIMER mode changes as
follows:
3.Time setting
Timer ON/OFF Function,(Set clock correctly before starting TIMER operation)
ON OFF
Then select TIMER mode as needed
5.Canel TIMER mode
Just press TIMER button several times until TIMER mode disappears. According to the time
setting sequence of TIMER ON and TIMER OFF, either start-stops or stops-start can be realized.
4.Timer confirming
After time setting ,press SET button to confirm time.
Timer ON-OFF Function
After replacing batteries or if apower failure occurs,TIMER setting must be reset.
Remote controller has memory function.When you use TIMER mode next time,just press SET
button after mode selection if timer setting is the same as the previous one.
Press time button
Every time the button is pressed,time increases an hour.If the button
is kept pressed,time will changes quickly.
Every time the button is pressed,time decreases an hour.If the button
is kept pressed,time will changes quickly.It can be adjusted with in
12 hours at will. AM refers to morning and PM refers to afternoon.
FRESH
HIGH/SO TIMER
SET
FILTER
B
HEALTH
RESET
LOCK
SLEEP
FAN
TEMP
ON
OFF
S W I N G
MODE
CLOCK
CODE
LIGHT
OFF
1
6
HIG
3
R
7
2
FIL
5
R
4
blank
TIMER ON TIMER OFF
HEAT