5
Important Points of Safety
Attention
Attention points for
use
l
Ensure ventilation of the room
if the machine is used with
burning facilities. Deficient
ventilation can cause oxygen
shortage.
l
Check whether installation
bench of the machine is
damaged after a long period
of use. Machine on damaged
bench may fall down and cause
human injury or other damage.
l
In place where winds produced
by the machine can reach, don’t
lay any animals or plants which
may be hurt otherwise.
l
Don’t put vases containing water
or other else on the unit assembly.
Otherwise, the machine may be
immersed internally and result in
bad electric insulation causing
electric shock.
l
The is machine CANNOT be
used for the purpose of prese-
rving food, animals, plants,
precision instruments and
artwork etc., which may be
destroyed otherwise.
l
DON’T replace fuse with ma-
terial other than fuse of proper
capacity. Replacing fuse with
metal wire or copper etc. can
cause fire hazard or other faults.
l
DON’T lay any burning facilities
in place where winds produced by
the machine can reach. Incomplete
combustion of burning facility may
be caused otherwise.
l
DON’T clean the machine with
water. Electric shock may occur
otherwise.
l
DON’T put flammable spray
articles nearby or spray them to
the machine. Fire hazard may
occur otherwise.
l
DON’T operate switch with wet
hand. Electric shock may occur
otherwise.
l
Stop operation and shut down
manual power switch before
cleaning and maintenance.
l
The power supply MUST be of
rated voltage and connected with
special electrical supply circuit.
!
Summary of Contents for MRV 09 Series
Page 20: ......
