Haier LT32F6, User Manual

Page: 40 / 52

| HD Ready LCD TV | User Manual
p.38
The window for recording progress 3.
will be minimized during recording.
See fig. 86.
Press PAUSE 4.
29
again to stop
Time Shift function and stop
recording program. See fig. 87.
NOTE:
Please do not unplug the USB •
storage device when the Time
Shift function is activated.
Approximately 4GB of memory •
buffers about offer 180 minutes
for 480i content or 30 minutes for
1080i content.
Once 4GB of data gets stored, •
the time shift function will delete
the stored data and restart the
buffering of content. This occurs
even for USB devices larger than
4GB.
TIME SHIFT FUNCTION
This TV allows you to pause and record
the currently watched digital program
(ATSC or QAM) to a USB storage device,
and to resume to the point where it was
paused.
NOTE:
Formatting a USB 2.0 storage device •
will be needed. Save your original data
before formatting. All the data stored
in the USB device will be erased after
formatting.
Sleep timer will be suspended if it had •
been set before activating the Time
Shift function.
USB Drive Storage Format
Select to format the USB device and
allocate the amount of space for the Time
Shift function.
NOTE:
The format process will take at least •
2 minutes. Please do not turn off the
power or remove the USB device
during formatting.
During formatting, a speed test will be •
done on the USB device. If it fails, it
means the USB device may not support
the Time Shift function.
Record a paused DTV program to USB
storage device
While in the TV input source, insert 1.
USB storage device to the USB port on
the side of your TV.
Press PAUSE 2.
29
to start Time Shift
function. The TV program paused. The
Time Shift OSD appears, and starts
recording.
See fig. 84 and 85.
Vol
29
fig. 84
-00:01:01 15:00 15:30
fig. 85
-00:01:07
fig.86
-00:17:11
1x
15:00 15:30
fig.87