Haier LT26K1 User Manual Download Page 10

Page: 10 / 49

| HD Ready LCDTV | User Manual |

p.08

WALL MOUNTING

NOTES:

- Please read the important safety

instructions before use.

WALL MOUNTING (Optional)

MPORTANT: When drilling into walls always check that there are no hidden

wires or pipes etc. Make sure that the screws and wall plugs supplied are

suitable for supporting the unit. Consult a qualified tradesperson if you are

not sure.

NOTE:

It would be useful to ask someone to help you at this stage.

For 26”/32” TV

Put the unit face down on a safe, flat surface that is covered by a smooth cloth.

Remove the screws of the stand.

See fig 4 and 5

Stand

fig. 4

Screws

fig. 5

For 37”/42”/47” TV

Put the unit face down on a safe, flat surface that is covered by a smooth cloth.

Remove the screws of the stand.

See fig. 6

Install the cover at the bottom of the TV.

See fig.7

fig. 6

Screws

Stand

Summary of Contents for LT26K1


















































Search results

Summary of Contents for LT26K1

Reviews:

Related manuals for LT26K1

Brands by name

Popular brands

Haier LT26K1, User Manual

Search results

Summary of Contents for LT26K1

Reviews:

Related manuals for LT26K1

Brands by name

Popular brands