Haier LE50F2280 Manual Download Page 12

-11-

OPERATION

CC Mode                                

 

CC On

Basic Selection CC1

Advanced Selection Servicel

Option

Enter

VGA Setting

H-Pos

V-Pos

Clock

Phase

Auto

50

38

50

17

OK

Cancel

Audio

Setup

Back 

Move 

OK

TV

ENTER

MENU 

Picture

Lock

Picture Mode
Contrast
Brightness
Sharpness
Tint
Color
Color Temperature
Advaced Video

Personal

50
50
50
50
50

1. PICTURE MENU

 

 

In this menu,you can adjust the picture options here,
such as contrast, brightness, etc.
Press          to select, press ENTER to adjust.

1.1 VGA Setting

When a PC is connected, you can adjust the VGA settings.
1) H-Pos: Adjust the horizontal position of the screen.
2) V-Pos: Adjust the vertical position of the screen.
3) Clock: Fine tune the screen width.
4) Phase: Fine tune the phase of the screen. Usually  you 
don't adjust this item.
5) Auto: Auto adjust to fit the screen.

Note: 
1) If you want to adjust contrast, brightness, color, and 
sharpness, the picture mode must be set to personal.
2) This will increase or decrease Warm (red) and Cool (blue) 
colors to suit your personal preference.
Select Cool to give the white colors a blue tint, Normal to give 
the white colors a neutral tint, Warm to give the white colors a 
red tint.

Standard mode is the default setting, if you select some other 
options, the power consumption may change.

2.AUDIO menu

In this menu, you can ajust the sound options here.
Press         to select, press 

 to adjust.

ENTER

3. 

In this menu, you can adjust the Menu language, 
Closed Caption, 

Press         to select, press 

 to adjust.

SETUP menu

adjust the sleep timer, time zone, 

Restore Default, etc.

ENTER

3.1 Closed Caption

Note:
1) 
2) 

Audio language is available in ATSC/TVmode only.
Auto volume is available only when the input signal 

volume is too large or there is distortion.

Back 

Move 

OK

TV

ENTER

MENU 

Picture

Lock

Menu

 

Language

Closed

 

Caption

Steep

 

Timer

Time

 

Zone

DST
Time

 

Format

Clock
Restor

 

Default

Software

 

Update

English

off

Pacific

off

12

-

hour

Setup

Audio

1) CC Mode: Switch the closed caption mode.
2) Advanced selection: only available in  ATSC.
3) Option: Used to edit the CC font.

Note:
1) Restore Default: Restore Default will clear all the 
programs and reset all the settings to default value.

Setup

Back 

Move 

OK

TV

ENTER

MENU 

Picture

Lock

Sound Mode 
Bass
Treble
Balance
Audio Language
Digital Output
Surround Sound
Audio Only
Auto Volume

Standard

50
50
50

English

RAW

off

off

Audio

Summary of Contents for LE50F2280


















Reviews: