background image

1.2 )Auto Tuning (DVB-C)

2). Press the

▼▲

buttons to select Auto Tuning and then 

press the OK button. 

3). Press the

▼▲

buttons to select DVB-T/DVB-C .Press 

select DVB-C and then press the OK button to confirm.

4). Press

buttons to select Scan type/Symbol (Ks/S) 

press the OK button to confirm.

5). In the Tune Type menu, press the 

buttons to 

select ATV / DTV / DTV + ATV. Press the 

button 

and then press the

 buttons to select the 

country where you will operate the TV. Press the 
OK button to confirm. 

▼▲

◀▶

◀▶

▼▲

1). Press the MENU button and then press the

▼▲

 buttons

to select the CHANNEL menu and then press the OK button.

Operation

CHANNEL

PICTURE

SOUND

TIME

OPTION

LOCK

Auto Tuning

ATV Manual Tuning
Programme Edit

Signal Information

CADTV Manual Tuning

Software Update(USB)

CI Information

OK

OK

BACK

MOVE

OK

MENU

OK                                         

Greece

Nederlands

  

Germany

Portugal

Poland

Italy

Hungary

Luxembourg

Norway

6). Channel tuning will commence. This operation may 
take up to 

 The display will show the 

progress of the tuning and the number of channels 
found.
7). If you want to skip the ATV tuning, press the MENU 
button to interrupt the tuning half way. A pop-up screen 
will be displayed, press the

button to select YES to 

confirm. You will then go straight to DTV tuning. You 
may repeat the above step if you also want to skip the 
DTV tuning. An installation reminder will appear the 
next time you turn on the TV.
8). After tuning is complete, the channels are arranged 
in a preset order. If you wish to skip channels, modify 
the preset order or rename channels, select P

rogramme 

Edit under the channel menu. 

some minutes

.

2. 1 ) DTV Manual Tuning (DVB-T)

All the channels including ATV,  DTV and Radio 
can be tuning by one time,if the Tune Type is 
DTV+ATV . 

All the stored channels will be disappear after 
auto tuning .

After auto tuning , the channel will skip to 
the first DTV channel.

1). Press the MENU button and then press the

▼▲

       

buttons to select the CHANNEL menu and then 
press the OK button.

Programme(s)
Programme(s)

Programme(s)

Programme(s)

1

ATV

- 39 -

Summary of Contents for LE43K6500TF


































































Reviews: