Haier LE42H6600CU, Instruction Manual

Page: 18 / 28

Operation
EN-16
Select
Channel
Search
1.
Tuning setup m enu
1.1. Press the MENU button and then press the
buttons to select the CHANNEL menu and then pressthe OK
button or Right button.
1
.
2
. Press the buttons to select Auto Scan and then
press the OK button.
1.2.1
If you select DVB-T, the next step is to select the Tune
type and country then press the OK button to start tuning.
1. .
2
.
2
If you select DVB-
-
C, the next step is to con g the DVB-C
system like (scan type / Frequency/ NetworkID/Symbol(KS/S)
this step is the
same as DVB -T, select the tune type (DTV/
ATV).Choose the right country,
1.2.3 Channel tuning will commence. This operation may take
up to . The display will show the progress of the tuning and
the number of channels found.
.
press OK button to start.
then press OK button to into the tune type and country select
menu,
1.2.4 If you want to skip the ATV tuning, press the MENU
button to interrupt the tuning half way. A pop-up screen will
then go straight to DTV tuning. You may repeat the above step if
you also want to skip the DTV tuning. An installation reminder
will appear the next time you turn on the TV.
Note
: All the channels including ATV, DTV and Radiocan be tuning
by one time,if the Tune Type is DTV+ATV .All the stored channels
will be disappear after auto tuning After auto tuning , the
1.3 ATV Manual tuning
1.3.1 Press the MENU button and then press the buttons to
select the CHANNEL menu and then press the OK button.
1.3.2
Press the buttons to select ATV Manual Tuning and
then press the OK button.
1.3.3
Press the EXIT button to exit the menu
1.4DTV Manual Tuning (DVB-T)
1.4.1
Press the MENU button and then press the buttons
to select the CHANNEL menu and then press the OK button.
1.4.2
Press the buttons to select DTV Manual Tuning
and then press the OK button.
1.4.3 Press the EXIT button to exit the menu.
źŸ
źŸ
źŸ
źŸ
źŸ