07
INSTALLATION NOTES
Base Stand Assembly Instruction
Introduction
1. On each desk stand, identify the longer leg of the
stand, and slide the rectangular section of the desk
stands into the TV so that the longer leg is facing
towards the front of the TV.
2. Insert the long screws into the holes in the rear of the TV
that line up with the holes in the rectangular section of the
metal desk stands, and tighten the screws firmly. You may
need to slightly jiggle the metal base stands around in their
holes to allow the screws to be correctly seated prior to
being tightened.
(32")
(
)
32"
4x12PWB
(40")
(40 )
"
4x20PM
4x20PM
Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection on the screen can
cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component failure.
Please do not attempt to rotate the TV on the stand.
(
43"/50")
39"/
4x14PM
4x14PM
4x12PWB
(
43"/50")
39"/
Summary of Contents for LE32K6000
