Power supply to switch on/off this Unit
Before switch on, ensure that all connections will be proper
and correct.Press Power on/off (at the botton of the rear
panel of this Unit) to turn on/off this Unit.When the power
indicator turns red, this Unit accesses the power on and
standby state.
Basic Operation
Press
key to start this Unit.The power indicator turns
Press
key once again to switch off this Unit
.
If there is no signal for the current signal source, this unit will
automatically set to the standby state 10 minutes later.
If not to use the main Unit for a long time, unplug the AC
power cord from the AC outlet.
off.
If "Home mode" is choosen, the following menu will display.
Installation Guide
The installation guide only appears when the TV first time
turns on or reset to default.
1).Press the
▲▼
buttons to navigate the menu and change
the settings. Press the OK button to confirm. Select your
desired language to be displayed on the menu
2).Setup the new password.
HOME or Shop modes
1). When the unit is turn on for the very first time, it will show
Initialization set-up menu. After the OSD language is set, the
user can choose between "shop mode” and "home mode".
,then press the
OK button to enter the password menu.
Press the Menu button to go
back to the previous menu.
When the screen shows the following setting menu and the
cursor stays on the "home mode" choice, press the
◀▶
buttons
to adjust, and "OK" to enter the the next prompt
menu.
Press the Menu button to go back to the previous menu.
Select the OK button then press the "OK" buttonto enter the
DVB Tuning Type menu.Select the Cancel button then press
the OK button to go back the previous menu.
2). Press the
buttons to select DVB-T/DVB-C and then
press the OK button to confirm.
◀▶
Press the Menu button to
back to the previous menu.
Select DVB-C, press the OK button to enter the Operator
menu, press the
◀▶
buttons to select operator, then press
the OK button to enter the country menu. ,press the
◀▶▲
▼
buttons to select the country, then press OK button to
enter the Tuning Mode Full menu. Press the OK button to
start tuning.
Press the Menu button to go back to the previous
menu.
Channel tuning will commence. This operation may take up
to some minutes. The display will show the progress of the
tuning and the number of channels found.
If you want to skip the DTV or ATV tuning, press the MENU
button to skip the tuning.
Please
select
an
OSD
language
Dutch
Russian
Greek
French
Italian
Spanish
German
Rome
Czech
Polish
Portuguese
Hungarian
English
Password
Please
enter
new
password
Confirm
new
password
OK
Cancel
Are
you
sure
to
change
to
Home
mode?
DVB
Tuning
Type
DVBC
DVBT
Country
France
Italy
Spain
Czech
Poland
Portugal
Russia
Greece
UK
Netherlands
Hungary
Germany
Romania
Channel Tuning
ATV : 0 Programme s
)
(
DTV : 10 Programme s
)
(
R
: 4 Programme s
)
adio
(
D
: 0 Programme s
)
ata
(
6
%
U
HF
CH
24
DTV
Exit
Exit
Skip
MENU
Yes
No
Do
you
want
to
exit
tuning
?
DVB Tuning Type
D T V
A T V
D T V
+
A T V
Move
Enter
OK
Select DVB-T, press the OK button enter the country select
menu, press the
◀▶▲▼
buttons to select the country,
then press OK button to enter the DVB Tuning Type Menu.
Press the Menu button to go back to the previous menu.
Press the
▼▲
buttons to select DTV / ATV / DTV + ATV, and
then press the OK button to confirm.
Press the Menu button
to go back to the previous menu.
8.
Measurements and Adjustments
Service Manual
Model No.:
- 42 -
Summary of Contents for LE32K5000
