background image

5-2 HDMI Connections

When the source device(DVD player or Set Top Box) supports HDM
How To Connect

1. Connect the source device to HDMI port of this TV with an HDMI cable(not supplied 
with this product).
2. No separated audio connection is necessary.

How To Use

If the source device supports Auto HDMI function, the output resolution of the source 
device will be automatically
set to 1280x720p.
If the source device does not support Auto HDMI, you need to set the output resolution 
appropriately.
To get the best picture quality, adjust the output resolution of the source device to 
1280x720p.
Select HDMI input source in input source option of Select Main source menu.

When the source device(DVD player or Set Top Box) supports DVI
How To Connect

1. Connect the source device to HDMI port of this TV with a HDMI-to-DVI cable(not 
supplied with this product).
2. A separated audio connection is necessary.
3. If the source device has an analog audio output connector, connect the source device       
audio output to DVI Audio In port located on the PC port.

How To Use

If the source device supports Auto DVI function, the output resolution of the source device 
will be automatically
set to 1280x720p.
If the source device does not support Auto DVI, you need to set the output resolution 
appropriately.
To get the best picture quality, adjust the output resolution of the source device to 
1280x720p.
Press the INPUT button to select HDMI input source in input source option of Select Main 
source menu.
Installation

  Service Manual

  Model No.: 

- 19 -

Summary of Contents for LE32F32200






















































Reviews: