background image

 TV OPERATION

Hotel Mode:

Panel  key  lock  : 

Keypad  will  be  locked,  when  Key  Lock 

mode is on.

Max  volume:

  Set  max  volume  limitted.This  option  allows 

you to set the Max Volume Level.

Start Source

Choose source, the options as follow:                  

TV/YPbPr/PC/HDMI/AV/USB, press the 

 or 

  button to 

select the desired source.

Start Channel : 

In TV mode, you can select a channel 

number to be set as the TV present channel. Press the 

 or 

 button to select the desired channel number .

Setup Menu display :

Main menu lock , main menu will not 

display when set to “No”

Input source change : 

Source lock

you can't change the 

source, when set to “No”

Volume default : 

Power on default volume, press the 

 or 

 button to select the desired volume.

Hotel Mode Operation

Hotel Mode Operation
Panel key lock
Max volume

Start Source

Start Channel
Setup Menu display
Input source change
Save To USB
Load

OFF
OFF
100

TV

1

Yes

Yes

Please press source key first,and then press number key 
“1001” to enter into Hotel Mode.

Volume default

0

Save To USB

: Backup all TV setting data to USB disk. 

(backup file named DATABASE.bin)

Load

: Restore this data to TV from USB disk. When

restore is executed

the TV will reboot.

-12-

Hotel Mode Operation : 

Set Hotel mode on/off.  

Summary of Contents for LE24T1000F
















Reviews: