Haier LCD19W-M3, User Manual

Page: 14 / 41

Basic Operating Instructions
Select the TV Channel
You can use the number keys on the remote control to directly select TV
channels.
The LCD-TV can store up to 100 channels , and you can press the keys on the
remote control or on the panel to make a selection.
1. if you want to choose any channel from 0 to 9, please press the -/-- button
until - is indicated on the screen and then press the relevant key on the
remote control. for example: if you want to choose channel 8, just press the
Key number 8.
2.If you want to choose a channel bigger than 9, please press the
-/-- button
until -- is indicated on the screen. Enter the two digits of the channel
number you want to watch.. for example: select channel 16
Note: if you want to choose one digit channel in this condition, you should press
0 first and then one digit number key.
Picture Mode
Press P.STD button on the remote control for menu display . For desired mode as
follows:
PERSONAL
STANDARD FRESH MILD
Program Swap
1
2
3
Suppose the channel number you used is now channel 8 and the channel number you
are using is 18 (as shown in the figure).
If you want to return to the last watched program channel 8, you can simply press the
SWAP(Q.VIEW) button.
If you want to return to channel 18, press the button again. Through this function, you
can easily change between the channel you are using and the channel you used last time.
SLEEP
Press SLEEP button to set the sleep timer among 0MIN/15MIN/30MIN/45MIN/60MIN/
90MIN/120MIN/180MIN/240MIN. If 1 minute left, the OFF 59S will appear on the screen.
The TV turns off automatically when the time is on.
SCAN
Press SCAN button to skim the channels . You can press SCAN again or MENU to stop
scanning.
S SM
Press AUDIO(SSM) button on the remote control for menu display . For desired
mode as follows:
PERSONAL
STANDARD VOICE MUSIC
ZOOM
Press to zoom into the picture .