![background image](http://html.mh-extra.com/html/haier/lc-2610d/lc-2610d_operating-instructions-manual_138178012.webp)
13
20
13
21
ANT.
EXTERNAL AUDIO AND VIDEO EQUIPMENT CONNECTION
You can connect outside signal source VCR, VCD,
DVD , PC equipment to the TV set.
Antenna Input
1.Connect the coaxial cable input to the back cable
input of the LCD.
2. Connect the antenna to the source coaxial input.
3. Press TV/AV button to select TV mode.
AV input
1.Connect audio video output port on source to
AUDIO IN and VIDEO IN port in TV set.
2. Press TV/AV button to select component
VIDEO mode.
3. Press PLAY button on source to start watching.
S-VIDEO input
If you use S terminal as signal input source,
the image quality will be better than video(AV).
1.Connect S terminal output on source to S terminal
input in TV set.
2.Connect S terminal left/right audio output on source to
the relevant port in TV set.
3.Press TV/AV button repeatedly until the display
mode is S-VIDEO.
4.Press PLAY button on source to start watching..
DTV input
1. Composite terminal (Y/PbCb/PrCr) connect to the
composite output of picture output device (such as
DVD, HDTV TUNER and so on ), the sound is input
from AUDIO IN:
2.Press TV/AV button to select YPbPr mode.
3.Press PLAY button on the external device to start
watching.
HDMI input
1.Connect HDMI signal source output to the HDMI
input in this TV set.
2.Press TV/AV button to select HDMI mode.
3.Press PLAY button on the external device to start
watching.
DVI input
1.Connect DVI signal source output to the HDMI
input in this TV set.
2.Connect audio output to the VGA audio input of
this TV set with DVI audio cable.
3.Press TV/AV button to select HDMI mode.
4.Press PLAY button on the external device to start
watching.
VCR
AUDI O I N
L
R
S-VI D E O
IN
VIDEO IN
VCD
AUDIO I N
L
R
S-VIDEO
I N
VIDEO IN
DVD
DVD
L
R
AUDIO I N
Y C b/Pb C r/Pr
HDMI
DVD
HDMI
DVD
DVI
L
R
VGA-AUDIO-IN
USING YOUR TV AS A COMPUTER DISPLAY
VG A-A UDIO IN
VGA
VGA input
1. Connect the VGA output port in the computer to the VGA port in the TV set.
2. Connect the audio cable in computer to VGA AUDIO IN port in TV set.
3. Press TV/AV button to select VGA mode.
4. Turning on the computer, the screen image of the computer will display on the
TV set.
At this time, the TV set can be used as a computer display.
Note:
1. If the temperature of the TV set is rather low, it is normal that there may be some
screen artifacts when the set is first turned on.
2. Nonconforming pixels may occur on the panel, but they have no influence on the
normal function of the display.
3. In the standard operation, It is normal if there is one bright dot or dark dot on the
screen.
VGA
SVGA
XGA
640*480
800*600
1024*768
31.5KHz
37.9KHz
48.4KHz
60Hz
60Hz
60Hz
Mode
Resolution
Horizontal
Frequency
Vertical
Frequency
RESOLUTION:
Note: The above parameters are VESA standard.