5
1
2
3
6
5
Remove all packaging components.
If need to bolster, choose
a stable, smooth setting
block, be sure to keep in
mind the foam base never
use for setting block.
Note: Product technical data reference each series of models
Clockwise rotation to increase the Beverage Chiller height.
Contrarotate to reduce the Beverage Chiller height.
D
W
d
c
b
a
H
4
Beverage Chiller open door size.
(Unit: mm)
Cleaning the Beverage Chiller before use.
MODEL
a
b
c
d
LC-138WB
649
1037
1015
495
Above 10cm
Above 10cm
Above 10cm
L
Adjustable
H
PREPARATION BEFORE USE
Including thin film, box cover, foam base and fixed tape must be removed.
Well-placed, it’s better to clean the Beverage Chiller, use soft close to wipe the wine
On standing
After installed and cleaned, please don’t power on right away, on standing at
least 30 minutes, and then power on, to ensure normal operation.
Check the attachments and datum.
Check the contents according to the packing list.
Put the Beverage Chiller on the suitable position.
Don’t put on to cold environment.(less than 10°C)
Don’t put in the rain or outside the room.
Don’t put Beverage Chiller on the wet place or some places easy to splash, if
wet use close to wipe, rust protection, influence on insulation performance.
Put Beverage Chiller keep away from the heat source, don’t direct sunlight, to
avoid affecting performance.
If put the Beverage Chiller on the carpet, wood floor, the heat may distain the
floor, so must mat interlayer.
Around the Beverage Chiller need to empty 10cm space to rejection of heat.
Put Beverage Chiller on the flat floor, if uneven floor Beverage Chiller running
produces vibration and noise, cause failure. We can adjust the sole of the
Beverage Chiller according to the floor flatness, decrease the vibration and
noise.
Attention
