Introduction
5. Remote Control Installing Batteries
1). Open the battery compartment cover on the back of the remote control.
2). Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don’t mix different types or used batteries with new ones.
3). Close the cover.
- The remote control should be operated within 23 feet (7m) and 30
0
to the left and right of the
IR receiver at the front of the TV.
- Used batteries should be disposed of properly
9
4. Base Stand Assembly Instructions
Note: the pictures below are only for reference
1. Put the stand on the TV set
2. Screw the stand in the positions with the screws supplied (6 x M4 x 12).
Parts
needed for base stand assembly
Installation
(Gently place the TV face down on a soft, flat surface, such as a blanket,
foam, or cloth.)
Rear cabinet of TV
Screws:6 x M4 x 12 (supplied)
TV stand
Screws: 6xM4x12
Batteries shall not be exposed to excessive heat such as direct sunlight or fire.
Step 1
Step 2
Step 3
Battery
Compartment
Cover
2 x AAA Battery
