6.
Program upgrading interface: upgrading program. Only for factory use.
6.
Factory mode instructions
This chassis use new HYF-35R remote controller (grey, 41 button, can not share with the original blue 35
button HYF-35R ), the method to enter the factory mode is: Screen-----P.STD------S.STD------Sleep Time.
The following is the instructions of the factory menu of V2.1 version program.
WHITE BLA White, dark balance adjustment
Name
Description
R OFF
G OFF
B OFF
White balance adjustment
R GAIN
G GAIN
B GAIN
Dark balance adjustment
AUTO TUNE
Automatic adjustment
FACTORY SET
Name
Description
POWER STB
ON: power standby OFF: standby memory
NOSYNC LOGO
Screen saver without signal ON: open OFF: close
BACK LIGHT
Background light brightness adjustment of screen: 0-255
DLC TEST
Automatic brightness control switch 1:open 2:close
TV BACK SCREEN
Background without signal BLUE: blue screen BLANK: blank screen
MCLK
SDRAM : clock impulse 120-166 we recommend not
adjusting.
PIP SIZE
PIP dimension MIDDLE: medium dimension LARGE: large dimension
INIT EEPROM
Initialize EEROM
INIT TV
Initialised factory signal do not use
PICTURE MODE
Parameter of picture mode adjustment
COLOR TEMP
Parameter of color temperature adjustment
SOUND MODE
Parameter of sound mode adjustment
Never adjust the following other items
7.
Structure dimension (see appendix 1)
Relevant dimension specifications of control panel PCB
(1)
PCB1 thick + the height of the highest component=22mm
PCB2 thick + the height of the highest component=30mm
(2)
PCB1=150mm*150mm
PCB2=155MM*146.5mm
The specification of screw hole: diameter 3.3mm screw hole , the structure diagram of hole position
8.
Transportation, storage and usage requirements
1.
Never press heavily and bend
2.
Eliminated static
Summary of Contents for L37A9A-A
Page 1: ...L37A9A A...
