Haier L32F1120, Service Manual

Page: 14 / 72

- 13 -
16 GND Ground
17 RX3- Negative transmission data of pixel 3
18 RX3+ Positive transmission data of pixel 3
19 GND Ground
20 PANEL_SEL No Connection (3)
21 SELLVDS Select LVDS data format (2)(4)
22 WP EEPROM Write Protect
23 GND Ground
24 GND Ground
25 N.C. No Connection (3)
26 VCC Power supply: +12V
27 VCC Power supply: +12V
28 VCC Power supply: +12V
29 VCC Power supply: +12V
30 VCC Power supply: +12V
Note (1) Connector type: STARCONN 106H30-011100-A2-R or compatible
LVDS connector pin order defined as follows
!
Note (2) High = Connect to +3.3V or Open: VESA Format, Low = connect to GND: JEIDA Format.
Please refer to 5.5 LVDS INTERFACE
Note (3) Reserved for internal use. Left it open.
Note (4) LVDS signal pin connected to the LCM side has the following diagram. R1 in the system side should be
less than 1K Ohm. (R1 < 1K Ohm)