background image

3

ADDITIONAL SAFETY PRECAUTIONS 

 

• Ensure that LCD TV stand is tightened properly to the set on the right way of tightening of  

  the screw of the stand to the set. Improper tightening of screw may render the set unsafe. 

• If  LCD TV is Installed on the wall, Installation should be carried out by qualified servicemen. Improper or incorrect    

  Installation may render the set unsafe. 

• Disconnect main plug when : 

   — cleaning the TV screen, never use abrasive cleaning agents.  

   — there is a lightning storm. 

   — the set is left unattended for a prolonged period of time. 

• Do not shift or move the LCD TV around when it is powered on. 

• Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects. 

• When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or  

   other soft material like chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen.

   These chemicals  will cause damage to the surface. 

• Wipe off water or saliva as soon as possible. These liquids can cause deformation and color fading of the   

   LCD screen when left exposed for some time. 

• Be careful of condensation when temperature changes occur.  Condensation can cause damage to the LCD  

   screen and electrically parts. After condensation fades, spots or blemishes will be present on the LCD screen.  

 

POSITIONING THE LCD TELEVISION 

 

• Place the LCD TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of  

  the LCD TV. 

• Try to leave at least 6” of space around each side of the LCD TV cabinet to allow for proper ventilation. 

• Do not place the LCD TV near a radiator or other sources of heat. 

• Do not place the LCD TV where it can be exposed to rain or excessive moisture. 

 

RECYCLING PROCEDURE/END OF LIFE DISPOSAL 

• To minimize harm to the environment, the batteries supplied with the LCD TV do not contain mercury or  

   nickel cadmium. If possible, when disposing of batteries, use recycling means available in your area. 

• The LCD TV uses materials that can be recycled.  To minimize the amount of waste in the environment, check  

   your area for companies that will recover used televisions for dismantling and collection of reusable materials,  

   or contact  your dealer for TV recycling tips.  

• Please dispose of the carton and packing material through the proper waste disposal management in your 

   area. 

Precaution

3

 

Summary of Contents for L26A9

































Reviews: