L40A5A
7
PREPARATION FOR REMOTE CONTROL
3
2
1
++
Remote control installation
1. According to the figure display below, place the remote control with face down,
then open the cover of battery apartment.
2. As in the figure display below, install two AA batteries. (The + and - symbol of
battery must match with the marks on the remote).
3.Close the cover of battery apartment.
Cautions for using remote control:
Confirm there is no object between the
remote control and the remote sensor
of TV set.
Sunshine or other strong light will
interfere the signal sent by the remote
control. In this situation turn the TV
set to avoid the direct light source.
Do not put the remote control in direct
heat or a damp place, or potential
damage to the remote may occur.
Please use two AA 1.5V batteries.
Do not mix battery types.
Install the batteries as the correct
polarities.
Do not use rechargeable batteries.
6
Base
Airproof board
(1)As figure, removing the four M4
×
20 screws, the base
will be disassembled.
(2)As figure, mounting the four M4
×
20 screws, the base
will be assembled.
Note:
The arrow indicates the position of screw.
The position to strike the screw.
BASE DISASSEMBLY/ASSEMBLY METHOD
WALL MOUNT BRACKET ASSEMBLY INSTRUCTIONS
(1) In order not to scratch the TV set, it is recommended putting the TV set with face
down on the soft and clean blanket.
(2)Disassemble the six screws from base and remove the base. (This item will be
cancelled if the product is without base.)
(3)Mount the airproof board.
(4)After completing the above operations, the complete set can be mounted on the wall
mount bracket.(Wall mount bracket operations refer to the assembly instructions of it.)
Note: 1. The arrow indicates the position of screw.
2. Wall mount bracket is additional purchase.
L26A5A
/
L32A5A
/
L37A5A
/
L42A5A
/
L47A5A
