background image

Basic Receiving and Playing Operations

25 TFT -LCD  television  Owner’s Manual 

cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug 
the power cord before you begin any cleaning.

Cleaning the Screen

Here’s a great way to keep the dust off your screen 

A

for a while. Wet a soft cloth in a mixture of lukewarm 
water and a little fabric softener or dish washing 
detergent. Wring the cloth until it’s almost dry, and 
then use it to wipe the screen.

Make sure the excess water is off the screen, and 

B

then let it air-dry before you turn on your TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, 
lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time 
(such as a vacation), it’s a good idea to unplug the power 
cord to protect against possible damage from lightning 
or power surges.

Troubleshooting

For the sake of time and cost, it is strongly 
recommended that you checkout the problem by 
yourself according to the instructions listed hereunder 
before contacting the after-sales service for technical 
assistance.

Problem

Possible remedies

No 
picture, 
no sound

Turn onthe power supply; Properly 
plug theTV setto the powersocket; 
Check to see if the power cable of other 
appliance is plugged in the TV set. Make 
sure that the power cable of the TV set 
is properly connected.

Problem

Possible remedies

Good 
picture, 
no sound

Depress the volume button;
Check out theaudio frequency input signals.

Failure of 
remote 
controller

Check to see if the remote controller 
display receiving window are blocked 
by other objects and if batteries are 
properly loaded.

No color, 
weak color 
or poor 
picture

Designate the item of color from the 
Picture menu and depress the volume 
button; Keep the display and VCR 
separate a reasonable space; Activate 
some functions to store picture 
brightness; Make sure that the display 
and signal source are available and 
turned on.

Excessive 
brightness 
or darkness

Adjust brightness or contrast.

Picture 
too big or 
small

Adjust the setup of sizes.

One 
speaker 
failure

Balance the sound in the menu.

Slight 
sound
from 
display

It is a normal phenomenon.

 Note

Do not leave the television with static picture in an 

R

extended period as it may result in residual image 
on your television screen.

 Note

Production of the screen requires high and precision 

R

technologies. However, there might be some 
dank or bright (red, blue or green) spots, or some 
anomalistic stripes or spots. This is not defect. If the 
TV set is used in an area 2,400 meters above the sea 
level where the air pressure is below 750hpa, the 
picture on the screen maybe affected and a muffled 
sound might be produced. These phenomena 
might happen in the area 1,500 meters above the 
sea level. This is resulted from difference between 
air pressures inside and outside the display. This is 
not a defect covered by the limited warranty.

Specification

%DVLFVSHFL¿FDWLRQDQGSDUDPHWHU

Summary of Contents for L24K3





























Reviews: