33
7. Adjustment/FW Upgrade/EDID
7.1 ADC Adjustment
It’s no need to adjust the white balance for this model, do ADC only.
Step1: Turn on the TV, press “Menu”, then press number key 1
Æ
9
Æ
9
Æ
9 and “ENTER”, it will achieve the factory
mode.
Take the following picture for example:
Step2: Change TV, press the “Current Source” to Component mode and change signal to 1080i mode, press the
“Auto Color”;
Step3: Change TV, press the “Current Source” to PC mode and change signal to PC TIMING 137(1024X768);
Pattern 147 (16 Grays), press the “Auto Color”.
Summary of Contents for L24C1180
