background image

11

TV Menu Operation instructions

TV Menu Operation instructions

Audio Setting

1. Preset:Speech,Standard,Personal and Music voice modes are

available, of which it is impossible to adjust bass and treble for 

Speech, Standard and music voice modes whereas it is possible 

to adjust bass, treble and balancer to set voice output effect 

according to individual preference under the Personal mode.

2. Bass and Treble: the adjustment range is from -10 to 10.

3. Balance: Adjustment range is from -10 to 10. When adjusted

form 0 to 10 for the left channel, the sound of the left channel 

decreases gradually to zero; when adjusted form 0 to 10 for 

the right channel, the sound of the right channel decreases 

gradually to zero.

4.  Virtual surround: Press this to turn off/turn on the Virtual 

surround.

Feature Setting

1. Menu language: Set the menu language. Defaulted as English.

2. Menu timeout: 10, 20, 30, 40, 50 and 60s are available.

3. Sleep timer: Set the time interval for the TV set to enter into

standby state (the function is not available under VGA mode). 

The TV set begins timing when sleep timing setting is completed.

4. Super contrast: Enhanced television image contrast

5. DCR: Contrast enhancing television dynamic image makes

image more hierarchical.

6. Root Source:Set the power on signal source  of the TV set.

7. Reset all: Restore adjustment items to the factory default

settings.

TV Setting(the following menu only display in TV mode)

1. Auto search: Used for auto channel search and TV program saving.

Press Menu/Quit key to quit.

2. Update search: Save the program already saved and start channel

search once again. Press Menu key to quit.

3. Manual search: Press Left/Right button to enter into submenu, 

as shown below:

Video

Audio Preset               Personal
Bass                            0
Treble                          0
Balance                       0
Virtual surround           off

Audio

Channel

Features

Move

Select

MENU

Video

Lang./

语言

Menu timeout
Sleep timer

DCR

Super contrast

Root Source
Reset all

English
20S

Auto

Off

Off

Off

Audio

Features

Channel

Move

Select

MENU

Video

Auto search
update search
Manual search
Program list

Audio

Channel

Features

Move

Select

MENU

Summary of Contents for L22T6




















Reviews: