1. The appliance has a filter replacement remainder
filter should be replaced.
simultaneously to clear the accumulated use time of the
timing starts again.
Troubleshooting
phenomenon
causes
make sure it is plugged into the
correct place
There is no electricity in the socket Change to another socket and try to plug in again.
correctly installed.
The product
emits abnormal
noise.
The appliance may operate
under overload for
inlet or outlet is obstructed.
Rurification
capacity is
reduced.
life comes to an end.
Remove and replace the filter by
referring to the previous detailed
Remote
controller fails
has come to an end.
2. The remote controller is
too far from the appliance.
1. Replace the battery.
2. Move it closer to the appliance.
The appliance
automatically
enters sleep
mode in non-
dark conditions.
Check if there any foreign
matter on the switch.
Remove the foreign matter.
17
18