13
Using your Cooker hood
For best performance, you should switch on the extractor 15 minutes before starting to cook and leave it to run
for approximately 15 minutes after the end of cooking.
Fig. 13
ON/OFF Key/Delay Timer:
• Press the
key to turn on/o the extractor. If the extractor is turned on, the delay timer can be activated by
pressing the
again. The display will show the symbol flashing for 4 seconds. By pressing the keys
or
,
the delay timer can be adjusted (max. 9 minutes). In order to deactivate the timer delay, press the
key again.
Clock Setting
• To set the clock on your extractor, press and hold the
key for 2 seconds. The clock display will flash. Use
or
keys to set the hour, press
key to set after which you can adjust the minutes. Once set, press
key to confirm.
Please note, the clock will return to its previous setting if no key is pressed for 5 seconds whilst setting the time.
Adjusting the Fan Speed
• Once the extractor is turned on, press the
key to set the fan motor to high speed. When pressed again, it
will reduce the fan speed from high to medium, to low and finally o .
Once the extractor is turned on, press the
key to set the fan motor to high speed. When pressed again, it
will reduce the fan speed from high to medium, to low and finally o .
Light Key
•
Press the
key to turn on/o
the lights. When the lights are on, the display will show the symbol
.
Summary of Contents for IT9001
