If the volume is less than the default level when the unit is set to standby, when the unit is
powered up again the volume will return to the default level.
If the volume is higher than the default level when the unit is set to standby, when the unit is
powered up again the volume will remain at that level.
3D
SOUND Button(On Remote Control Only)
This button allows you to choose between the two available audio modes, Virtual Surround
and Standard (Non-Virtual Surround).
(Play/Pause)(on Remote Control Only) – Press this button on the remote control to begin
playback on your iPod/iPhone/iPad. Press again to Pause playback.
/ Skip Forward/Back buttons(on Remote Control Only) - During playback press to
skip forward or backward to the next or previous track.
MENU
button(Remote control only) - Press this button to access the iPod / iPhone. This
button operates exactly like the
MENU
button on the iPod/iPhone itself.
+
/
-
(Plus/Minus)buttons(on Remote Control Only) - After pressing the
MENU
button to
access the iPod/iPhone, press the
+
/
-
buttons to move up(+) or down(-) within the Menu
display.
ENTER
button(Remote Control Only) - After selecting your desired selection in the Menu, by
using the
+
or
-
buttons, press the
ENTER
button to enable that selection.
NOTES: Menu Navigation by remote control does not work on touch screen products
like the iPad, the iPod nano 6th generation.
1.) If necessary, press the
POWER ON/OFF/PLAY/PAUSE
button on the main unit or
press
/ON
button on the remote control to turn the system ‘On’.
2.) To skip forward or backward to different tracks, press the / button on the remote
control.
3.) The
MENU
button on the remote control works the same way as the
MENU
button on
your iPod/iPhone. Press the
MENU
button repeatedly to access the Main Menu of your
iPod/iPhone. Press the + / - buttons on the remote control to navigate Up or Down
through the displayed Menu list. When the desired Genre, Artist, Album, or Song is
‘highlighted’ on your iPod Menu display, press the
ENTER
button on the remote control
to ‘Enter’ or Select’ the highlighted item. If the highlighted item is a specific song,
pressing the
ENTER
button will begin playback of the song.
4.) To pause iPod playback press the
POWER ON/OFF/PLAY/PAUSE
button on the
main unit or button on the remote control. Press again to release pause and resume
iPod playback.
5.) To turn the system ‘Off’ completely, press and hold the
POWER
ON/OFF/PLAY/PAUSE
button for 3 seconds on the front panel or press the
button on
the remote control, until your iPod shuts off and enters the Charging mode. The top
panel power LED lighing turns “off”.
FUNCTION CONTROLS
10
