Haier HWR05XCJ, User Manual

Page: 10 / 20

1.ON/OFF
To turn set ON, press the button. To turn set OFF, press the button again.
2.TIMER
Press TIMER button. For each press, TIMER mode will changes as follows:
TIMER ON TIMER OFF CANCEL
Timer On or Timer Off mode is used to pre-start or shut off your unit in advance. You can
program this up to 24 hours in advance. You can use the Timer in both functions, i.e. Cool
or Fan Only.
Timer On
The unit must be on to set the timer. Unit will shut down automatically after it accepts the
settings in 5 seconds. Use this mode to pre-set the start time of the unit 24 hours in advance.
a) Press On . LED display will show "XX" (time set last time). When power is connected for
the first time, LED display will show "01".
b) Set the desired number of hours by pressing the ( ) pad of the Temp/Time buttons, once
for each hour. If you pass the desired time, use the ( ) pad key to lower the selection.
c) After you set Timer On, LED display will show the time. This time displayed means: the
unit will starts after X hours.