Haier HWO60S4LMX1, User Manual

Page: 10 / 14

●
Switch off all working units of the oven
●
Call the service centre
●
Some minor faults can be fixed by referring to the instructions given in the table
Knob is
.
Changing the Oven Lamp
Press the symbol and outward the
plastic latch that is in the corner at the
top of the door. Next take out the glass
from the second blocking mechanism and
remove. After cleaning, insert and block
the glass panel, and insert in the blocking
mechanism.
“ ”
Install door
Before any maintenance is started
involving electrical parts, the
appliance must be disconnected
from the power supply.
If the oven has been in use, let the
oven cavity and the heating elements
cool down before attempting any
maintenance.
Changing the bulb
Unscrew the protective cover. We
recommend that you wash and dry the
glass cover at this point.
Carefully remove the old bulb and
insert the new bulb suitable for high
temperatures (300
º
C) having the
following specifications: 220-240V,
50Hz, 25W, G9 fitting.
Refit the protective cover.
IMPORTANT
Never use screwdrivers or other
utensils to remove the light cover.
This could damage the enamel of the
oven or the lampholder. Remove only
by hand.
IMPORTANT
Never replace the bulb with bare
hands as contamination from your
fingers can cause premature failure.
Always use a clean cloth or gloves.
Please note:
The bulb replacement is not covered
by your guarantee
l
l
Tilting the hinge safety catches
Door removal