Haier HWO38MG4HXBD, User Manual

Page: 13 / 246

EN 13
TURNTABLE INSTALLATION
Cleaning the cooking compartment and putting the turntable in place. For
new installations, make sure all packaging and shipping tape has been
removed from the turntable shaft. Before using the appliance to prepare
food for the first time, you will need to put the turntable in place correctly.
You must clean the cooking compartment and accessories.
How to put the turntable in place:
1. Place the turntable ring assembly ③ into
the recess in the cooking compartment.
2. Place the glass tray
①
on the turntable
ring assembly
③
. Fit the raised, curved
lines in the center of the glass tray
bottom between the three spokes of the
shaft. Make sure that the glass tray ①
engages in the turntable shaft
②
in the
centre of the cooking compartment
floor. The rollers on the shaft should fit
inside the turntable bottom ridge.
Note
：
1. Never use the appliance without the turntable. Make sure that it is
properly engaged. The turntable can turn clockwise or anti - clockwise.
2. Never place the glass tray upside down. The glass tray should never be
restricted.
3. Both glass tray and turntable ring assembly must always be used
during cooking.
4. Some food a nd containers of food are always placed on the glass tray
for cooking.
5. Never restrict the movement of the turntable.
6. If glass tray or turntable ring assembly cracks or breaks, contact your
nearest authorized service center.