Haier HWMP55-918 User Manual Download Page 9

7

1.Preparation before washing

Preparation before washing

Preparation before washing
1. Connect the water inlet hose.
2. Inset the power plug into the electrical socket.
3. Ensure the drain hose is mounted at the correct height.
4. Select a suitable location for the washer on a hard, even 
    surface away from direct sunlight or heat sources, e.g. 
    radiators, cooking 
    appliances etc.
5. Any floor unevenness may 
    result in unstable  working 
    or abnormal noise. Please 
    ensure the machine is level.

Check the following before washing

Check if the
 laundry has
 any special
 washing 
instructions

Clear the 
pockets.  Take 
out loose items 
such as coins, 
sand, hairpins 
etc.

Tie any long 
strips, fasten 
buttons and 
close zippers.

When the machine 
is running buttons 
may cause noise.  
To reduce the noise 
turn clothes inside 
out or place them in
a laundry bag.

The weight of 
the laundry shall 
not exceed the 
rated capacity.  
Loosen the laundry 
before placing it 
evenly in the tub.

a. Check if the laundry is suitable for machine washing.
b. Divide the laundry into colour fast and non-colour fast items.
c. Place items that do not absorb water easily into the water by hand.
d. For heavily soiled items, please first remove loose dirt, then apply detergent 
    directly to the stain before washing.
e. For those items that may get lint or are furry or fluffy, please turn them inside out 
    before washing
f . Do not put laundry polluted by chemicals into the washing machine.

0.8m H 1.2m

Summary of Contents for HWMP55-918





















Reviews: