Connection between the water inlet hose and the washer
1.
Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water
inlet hose
jointer of the
water inlet valve
water absorption
cushion.
Connection between the jointer of the water inlet hose and the water inlet hose
1.
Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Locking level
the jointer of the
water inlet hose
Slider
Check the connection between the jointer of the water inlet hose
and the water faucet
1.
Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1.
Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept
on the faucet to prevent damaging the fixing screw.
Locking level
Slider
Description of operation button
5 Use the operation button
Indicator mode and meaning
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
"START/PAUSE" button
After the power is switched on, press it to
start the machine
During working, push it to pause.
During pause, push this button to restart
and go on working
a
START
PAUSE
AIR DRY
RINSE
SOAK
FUNCTION
WASH
SPEED
SPIN
SPEED
"
"
RINSE button
"AIR-
"
DRY button
Push the
D
button ,then the
D
is on,
D
The purpose is drying the
inner tub and the outer tub, which can avoid
growing mildew on the outer tub and the inner
tub.
"AIR- RY"
"AIR- RY"
indicator light
that means the "AIR- RY"
program is chosen.
"SOAK/FUNCTION "button
"WASH/SPEED " button
"SPIN/SPEED " button
NO WASHING
POWDER
DISINFECT
180MIN
120MIN
60MIN
30MIN
10MIN
20MIN
Press the Soak/Function button to
select a soak
procedure.
The button can be used to select the
desired soak time, i.e., 0, 10, 20 or 30
minutes from the Basic program or the
Jeans program.
The button is unavailable from the Fast,
Extra Fast, Standard, Cashmere,
Carpet and Water Saving programs.
From the Basic, Fast, Extra Fast or
Jeans program, press the button for 2
seconds. There is a buzz that indicates
the machine is ready for function
selection. Press the button again to
select No detergent or Disinfection.
When No Detergent is selected, the
related indicator lamp is on. In this case,
the maximum washing capacity is 4.0kg
and the maximum water level is 8. When
Disinfection is selected, the related
indicator lamp is on and the disinfection
function is initiated.
When No Detergent is not selected, i.e.
the No Detergent indicator lamp is off, a
detergent-dependent cycle is in place.
Press the button for 2 seconds. There is
a buzz that indicates the function
selection is complete. Then the soak
time can be selected.
Press the Wash button to select a
wash .
procedure
The button can be used to select
the desired wash time, i.e., 0-25
minutes from the Basic program or
the Jeans program. The button is
unavailable from the Fast, Extra
Fast, Standard, Cashmere, Carpet
and Water Saving programs.
For a pause during operation or an
initial operation, press the button
for 2 seconds to start wash speed
selection. The Wash indicator lamp
is on and the speed from 1 to A is
available for selection. The default
value is 8. After restart, the machine
is back to wash selection.
Press the button for 2 seconds.
There is a buzz that indicates the
speed selection is complete. Then
the wash cycle can be selected.
Note: 1. No speed selection from
the Cashmere, Carpet and
Water Saving programs.
2. A = 10
Press the Rinse button to select a
rinse
.
procedure
The button can be used to select
the desired number of rinse cycles,
i.e., 0, 1, 2 or 3 times from the
Basic program or the Jeans program.
The button is unavailable from the
Fast, Extra Fast, Standard,
Cashmere, Carpet and Water
Saving programs.
For the Basic program, the Water
Saving mode is selected
automatically. If the button is
pressed before operation, it will
change to Water Filling mode.
Press the Spin/Speed button to
select a spin
.
procedure
The button can be used to select
the desired spin time, i.e., 0-9
minutes from the Basic program
or the Jeans program.
The button is unavailable from the
Fast, Extra Fast, Standard,
Cashmere, Carpet and Water
Saving programs.
For a pause during operation or
an initial operation, press the
button for 2 seconds to start spin
speed selection. The Spin
indicator lamp is on and the
speed from 1 to A is available for
selection. The default value is 8.
After restart, the machine is back
to spin selection.
Press the button for 2 seconds.
There is a buzz that indicates the
speed selection is complete.
Then the spin cycle can be selected.
Note: 1. No speed selection from
the Cashmere, Carpet and
Water Saving programs.
2. A = 10
