13
Disposal after washing
Please
¿
rst pull off the power plug from the receptacle before cleaning.
z
After using, please clean the lint and foreign materials of the lint
¿
lter and
z
over
À
ow
¿
lter in time. Otherwise it may in
À
uence your using the machine.
1
1
2
2
3
4
The method of
dismantle: Push it up
aslant and gently.
The method of install :
install it upwards and
aslant and push it in.
Clean the detergent box and set it on the control panel seat.
Cleaning the lint
¿
lter
Push down the spring
piece of the top lint
¿
lter
to make the claws out of
the
¿
lter cover, and then
pull out the lint
¿
lter to
get it down.
Put the lint
¿
lter into
¿
lter
cover, and make it tight .
Make sure the lint
¿
lter
well installed, or it can
in
À
uence your use.
Pull the back of the lint
¿
lter, and then you can
get down it off the front
cover of the lint
¿
lter.
Sweep the rubbish in the
lint
¿
lter.
Put the back of the lint
¿
lter into the front cover .
Notes:
The
¿
lter screen of the water inlet valve is likely to be blocked by foreign materials and
z
in
À
uence the water inlet. Please clean it with brush every two
months.
If the cabinet is dirty, wipe it with wet cloth
z
Do not
À
ush it directly with water.
z
Wipe it with neutral detergent.
z
Do not wipe it with thinner, petrol, alcohol etc.
z
After washing, close the water faucet.
z
( If needed, you can dismantle the water inlet hose).
Do not store water in the washing machine for a long period.
z
Drain the water completely after each using.
Be sure to pull off the power plug before maintenance.
z
Hang up the power cord.
z
Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid
z
for some time ( about 1 hour), then close the top lid.
Thinner
Petrol
Alcoho