Install the bottom plate
Adjust the installation position
3
Please install and adjust the machine according to the requirement of the manual, which is very
important for you to operate the machine safely and properly.
After opening the package, please lean the
washing machine gently down on soft items
(like towel cloth, blanket, etc.). Install the
bottom plate to the bottom of the machine
with eight screws by a cross screwdriver,
then lift the machine up gently. See to the
figure:
Safety precautions
Before using
Before using
Before using
Before using
Front
Back
Soft item
Screw
Bottom plate
Loosen
Fasten
High
Low
Adjustable nut
Adjustable leg
The largest allowable slope of the shank base
of the machine is 2
. The slanting or rough
ground will result in unstable running or
stoppage of the machine. Please adjust it with
following methods:
Confirm it's horizontal:
Adjust the adjustable leg:
If the bulb of the level meter at the balance display
position is inside the standard circle, it indicates that
the machine is horizontal. Otherwise you need to
a d j u s t t h e a d j u s t a b l e l e g o f t h e m a c h i n e .
1.To twist the adjustable leg, please first lift up the
leg side slightly, loosen the adjustable nut, and
then twist the leg.
2.After adjustment, fasten the nut.
Air bubble
Standard circle
Suitable
Not suitable