Haier HWM70-9288, User Manual

Page: 13 / 15

13
Disposal after washing
Please fi rst pull off the power plug from the receptacle before cleaning.

After using, please clean the lint and foreign materials of the lint fi lter and

over fl ow fi lter in time. Otherwise it may in fl uence your using the machine.
1
1
2
2
3 4
The method of
dismantle: Push it up
aslant and gently.
The method of install :
install it upwards and
aslant and push it in.
Clean the detergent box and set it on the control panel seat.
Cleaning the lint fi lter
Push down the spring
piece of the top lint fi lter
to make the claws out of
the fi lter cover, and then
pull out the lint fi lter to
get it down.
Put the lint fi lter into fi lter
cover, and make it tight .
Make sure the lint fi lter
well installed, or it can
in fl uence your use.
Pull the back of the lint
fi lter, and then you can
get down it off the front
cover of the lint fi lter.
Sweep the rubbish in the
lint fi lter.
Put the back of the lint
fi lter into the front cover .
Notes:
The fi lter screen of the water inlet valve is likely to be blocked by foreign materials and

in fl uence the water inlet. Please clean it with brush every two
months.
If the cabinet is dirty, wipe it with wet cloth

Do not fl ush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol, alcohol etc.

After washing, close the water faucet.

( If needed, you can dismantle the water inlet hose).
Do not store water in the washing machine for a long period.

Drain the water completely after each using.
Be sure to pull off the power plug before maintenance.

Hang up the power cord.

Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid

for some time ( about 1 hour), then close the top lid.
Thinner Petrol
Alcoho