Haier HWM70-1708T, User Manual, Page: 35 / 40

Operation
13
You can use this function to clean the inner tub and outer tub of
washing machine.
Spin alternately, and the total soak time is 10hours to make sure better
clean effect.
Do not put clothes during tub clean process.
“Tub clean” function
Tub
clean
Cycle completed
When the machine has completed the selected/current wash cycle an audible
selected/current wash cycle an audible alarm will sound and the machine will switch
off automatically.
Button Operation and Descriptions
" Wash " button
Wash
The user can press wash button and then set the wash time with the indicator light on.
The wash time can set 5min 10min 15min 20min
When wash times is not required, please press the wash button continuously until you
want.
2.Press the“ ”button to select suitable automatic program.
Program
1.Press the button to switch on the power
After the power is switched on,“Normal” is automatically set. To select other fully-auto program,please press the " Program "
button till the corresponding indicator is light. Refer to the " Program " button on Page 15.
3. Press the“ ”button to select spin time.
4. Press the“ ”button to select suitable reserve wash program.
8. Press the“ ”button,close the top lid.
If the top cover is opened , the washing machine will stop running and tweet during spinning,
then close the lid,you must press the START/PAUSE again to continue running.
Spin
Spin
Delay
5. Press the“ ”button to select suitable function.
Rinse
6. Press the“ ”button to select suitable function.
Wash
Program
Delay
Rinse
7. Press the“ ”button to select suitable function.
Wash
Water
Level
Water
Level
15
Start
Pause