manualshive.com logo in svg

Haier HWM70-10, User Manual, Page: 6 / 20

Share
Download
Haier HWM70-10 User Manual Download Page 6

4

Installation and adjustment

The largest  allowed slope of  the 
shank base of the machine is 2

.

The slanting or  rough  ground  will 
result  in  unstable  running or 
stoppage of the machine. Please 
adjust it with following methods:

Adjust the adjustable foot:

Install the bottom plate

After  you  open  the package, please lean 
the washing machine gently down on soft 
items ( like the towel cloth, blanket, etc. ). 
Install the bottom plate to  the bottom of the
machine  with  the  eight screws  by a cross
screwdriver, then lift the machine up gently.
See to the figure:

Adjust the installation position

Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.

Push the lint filter downward to
location for lint filter.

1.To twist the adjustable foot, please 
   first lift up the side of the foot slightly, 
   loosen  the adjustable nut, and twist 
   the foot.
2.Fasten the nut after adjustment.

Loosen

Fasten

High

Low

adjustable nut

adjustable foot

Back

Front

Bottom plate

Screw

Soft items

Install the lint filter

Summary of Contents for HWM70-10





















Reviews:

No comments