background image

After using, please clean the lint and foreign materials of the lint filter etc. in time. 
Otherwise it may influence your using the machine.

1.After washing, close the water faucet.  ( If needed, you can dismantle the water inlet hose).

Please first pull off the power plug from the receptacle before cleaning.

5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time
 (about 1 hour),   then close the top lid.

4.Hang up the power cord and drain hose.

3.Be sure to pull off the power plug before maintenance.

2.Do not store water in the washing machine for a long period.  Drain  the  water  completely after each using.

If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol, 

alcohol etc.

Thinner

Alcohol

Petrol

The filter screen of the water inlet 
valve is likely to be blocked by
 foreign materials and influence
 the water inlet. Please clean it

Disposal after washing

14

Clean

When washing, lint filter must be used
After using, please clean it in time.

Lint filter:
1.Pull upward to detach

2.Clean the lint
   Put it in water and clean while it is still wet. 
  (See to Figure 1).

3.Press downward to assemble.

Figure 1

Figure 2

Dismantle

Install

Dismantle

Install

Summary of Contents for HWM6815





















Reviews: