Haier HWM60-113S User Manual Download Page 4

15

Trouble-shooting Answer to question

(If  there's  breakdown,  please pull  off the power  plug  before checking) The following
 phenomena  are not  breakdowns  sometimes.  Please  confirm  again  before sending
 it to repair.   If there are real  breakdowns,  please  come to  the  special  maintenance 
department or after-sale service department of our company. Do not repair it by yourself.

Phenomena                                   The reason

The machine does
 not act.

Is there power failure?
Is the power plug loose?
Is the pulsator twisted by foreign materials?

Is the drain hose put down?
Is the drain hose frozen?
Is the drain hose blocked by foreign material?
Are there laundries falling to the outer side of
 the spin tub?

The draining does not work

Are there hair pin, coins or metal items brought
 inside the tub?

Is the machine slanting?
Is the gland pressed evenly?
Are there laundries falling to the outer side of
the spin tub?
Are the laundries in spin tub too much?

It is the water remained in the factory inspection 
of performance.

There may be some 

waterflowing  out  of

the  drain hose  in  the

first  use  of the

machine.

There's abnormal 
sound and violent
 vibration during 
spinning

There's abnormal 
soundduring washing

2

Safety precautions

Please insert the power cord into 
special receptacle with rated vol-
tage.Be sure to use single-phase
 three pins  receptacle.The earthing
 terminal of the receptacle must be
 earthed reliably.If possible,please 
adopt electric leakage protector.

When the machine is normally
using, please put  the power plug
at the location easily to be insert-
ed and extracted by hand. Be sure
to pull the plug off when there's
power failure, or the machine is 
being moved, cleaned or when it 
is idle.

If  the power cord is bad, to avoid risk it is required to replace it by the 
technicians ofour special shop or the after-sale service department. 
Keep the pin of the power plug clean.

Earth

Do  not  put  the  machine  at  damp
place like  the  bathroom .  Never
wash  it   with water. Do not place 
wet laundries on the control panel.

Do not use water hotter than 50 C .

In case the washing  machine is  installed
on  ground  with  carpet ,  do not block the 
ventilation  hole  with  carpet.

Ventilation hole at
the bottom of the
washing machine

Do not wash water-proof laundries like
the raincoat,  bike  covers etc. to avoid 
abnormal vibrations  in spinning.

Do not let the machine share one receptacle
with  other electric  appliances. If  the  power
plug  is  damaged,  or  the  plugging  into the
receptacle  is loose, do not use the plug any
more.

Summary of Contents for HWM60-113S











Reviews: