。
Washing powder with poor quality or long-time storage may
get caked. Please clean the detergent box duly in usage.
Dissolve directly inside the washing machine: (not
applicable for fuzzy and reserve program)
1.Add some water
(select the
"1" water level)
2.Add washing powder. Run for about 30s to fully dissolve
the
Powder. Then push the"start/pause" button.
3.Put in laundries. Select suitable water level. Push the
"start/pause"
button again.
Quick dissolving of washing powder:
1. Prepare warm water of 30 C and container.
2. Add washing powder while stirring to dissolve it
completely.
It is not recommended to use rich-foam washing powder.
If you select save program, it is suggested to use liquid
detergent instead of washing powder to guarantee the
washing effect.
Please add suitable washing powder as per the laundries
quantity, the set water level and water quantity.
It is suggested to add washing powder into the box
directly under fuzzy program and reserve program.
。
The whitener shall not touch laundries directly.
Add water to stipulated level. Dilute the whitener with container,
and then pour it into the liquid whitener inlet slowly.
Laundries with color or pattern is not colorfast, thus not applicable.
For whitener in powder, dissolve it before use.
See to the manual of whitener for the usage and dosage.
The capacity of washing and spinning of the
machine refer to the largest weight of the
standard laundries under dry condition that
can be washed or spinned in one time. One
time washing quantity shall be lower than the
rated capacity.
The thickness, size, type of the cloth will inf-
luence the actual washing capacity. It is sui-
table for one time washing to put in reasona-
ble amount of laundries and the laundries can
be turned round in washing.
To wash thin laundries like the stocking, silk
etc , please first put them into washing mesh
bag (which can be purchased separately)
before wash.
Put in the laundries
How to use the whitener
How to use the washing
powder
Usage of the detergent
9
How to use softener
See to the manual of softe ner for the usage and dosage.
When adding softe ner into the softe ner inle t of washing
powder box, note that it shall not exceed the low er side
of the cap.
Do not lea ve the softe ner for lon g period afte r adding it
into the box. Otherwise it may be solidified and bloc k the inle t.
As the softe ner is easy to solidify, plea se clea n the box
fre quently.(You shall clea n it each time you use reserve
function).
Before use softe ner, you must selec t to steril ize function
Add washing powder and softener into
the box directly as per indicated in left figure
After adding, close the box.
Washing powder inlet
Washing powder box
Softener inlet
Control panel seat
Liquid detergent
inlet
