manualshive.com logo in svg

Haier HWM200-B1678S, Owner'S Manual, Page: 19 / 22

Share
Download
Haier HWM200-B1678S Owner'S Manual Download Page 19

 

Redistribute the load evenly.

Push the Start/Pause button 

once.

Level the machine.

The display shows E4.

The display shows FA.

Is the water tap closed or

has the water supply been

interrupted?

Is the water inlet valve

blocked?

Is the water pressure too 

low? 

Open the water tap. Push 

the Start/Pause button once.

Clean the water inlet valve

then push the Start/Pause

button once.

Use after the water pressure

is normal.   

The water level sensor has 

failed.

The machine 

does not work.

Will not 

wash

Will not 

spin

There are abnormal

sounds inside the machine.

Is the machine level?

Has the laundry been placed

unevenly in the machine?

Are there any foreign objects

inside the bowl? 

Level the machine.

Redistribute the load evenly.

Close the top lid.

Remove the foreign object. 

Is the power plug inserted 

tightly?

Is the top lid closed?

Is the laundry distributed 

unevenly in the machine?  

Insert the power plug tightly

.

Close the top lid

.

Redistribute the laundry. 

Is there a power failure?

Is the power plug inserted

tightly?

Has the water level reached

preset position?  

Wait for the power supply 

to be restored.

Insert the power plug tightly

.

Wait for the water to fill to 

the preset level 

Trouble-shooting

16

If there is a fault or the machine dose not operate correctly,remove the power plug before

checking the machine.Using diagnostic list below,please check if the machine requires a

repair.If a repair is required,please contact our customer care team,do not try to fix it by

yourself.

The machine does not drain

or drain slowly.The display

shows E1.
The machine stops running

The display shows E2.
The machine does not drain

or drain slowly.The display

shows E3.

Has the laundry been placed

unevenly in the machine?

Is the machine level?

Is the drain hose blocked?

The top lid is not closed.

Remove the blockage.Push

the Start/Pause button once.

Close the top lid.Push the

Start/Pause button once.

Problem

Possible causes

What to do

Please contact Customer 

Care.

Is the drain house set too 

low?

The height of the end of

the drain house should be

between 0.8m-1.2m.

Is the drain pump 

ineffective?

Contact Customer Care.

Summary of Contents for HWM200-B1678S























Reviews:

No comments